Hello all, I have minor issue I'm hoping someone can help me with.
Any time I use Cura in Rep Host a M107 (fan off) command is added to my Gcode, first thing after my start Gcode.
I'm using this Gcode on my Makerbot rep2 (after conversion to X3G) the issue is that the fan it turns off is the one cooling the extruder. I have always gone in and manualy removed the M107 before saving the Gcode.
It seems no combination of checking/unchecking the Enable Cooling box (Rep-host Slicer tab) changing min/max fan speed, setting "fan full at height" or "minimum speed" (Cura Print/extrusion tab) will get rid of this command.
Anyone know what setting I can change to stop this command from getting added to my Gcode?
**** end of start.gcode ****)
;Layer count: 150
;LAYER:0
M107
G0 F9000 X-1.844 Y-0.640 Z0.300
G0 X-2.828 Y0.845
;TYPE:SKIRT
G1 F2400 X-3.462 Y1.540 E0.05116
Any time I use Cura in Rep Host a M107 (fan off) command is added to my Gcode, first thing after my start Gcode.
I'm using this Gcode on my Makerbot rep2 (after conversion to X3G) the issue is that the fan it turns off is the one cooling the extruder. I have always gone in and manualy removed the M107 before saving the Gcode.
It seems no combination of checking/unchecking the Enable Cooling box (Rep-host Slicer tab) changing min/max fan speed, setting "fan full at height" or "minimum speed" (Cura Print/extrusion tab) will get rid of this command.
Anyone know what setting I can change to stop this command from getting added to my Gcode?
**** end of start.gcode ****)
;Layer count: 150
;LAYER:0
M107
G0 F9000 X-1.844 Y-0.640 Z0.300
G0 X-2.828 Y0.845
;TYPE:SKIRT
G1 F2400 X-3.462 Y1.540 E0.05116