Communication timeout - reset send buffer block
i recently installed a fabrikator mini 3d printer at my home, configured it with the user guide that came with the printer, and was able to print over 10 times, but then i had to move the printer so i...
View ArticleRepetier Stops driving extruder and heat bed mid-print
I'm using Repetier 1.6 on Windows 7 machine. I've had this problem randomly crop up with older versions of Repetier.I can tell from the "Temperature Curve" graph that the extruder (and/or heat bed) is...
View ArticleMy extruder won't heat up
Ive tried everything. Every software version of repetier and still nothing . Its not my wire connector and I have voltage. I can manually set the temp on the extruder will printing. Also its not in dry...
View ArticleHelp selecting a sensor for auto bed leveling
So I want to install auto bed leveling on my mendelmax 2.0. I have 2 questions:1. What type of sensor would you suggest? I am printing on glass so I'm considering either a capacitive NPN sensor (in...
View ArticleAny way to automatically modify changed EEPROM settings back in Configuration.h?
So I have flashed my configuration to my arduino mega but then changed many EEPROM settings directly from Repetier Host.Is there anyway to automatically change the values of the changed settings in...
View ArticleDitto Printing with Repetier-Host
Hello, I have a Geeetech I3 Pro C dual extruder printer. I was wondering if I can do ditto printing (two jobs simultaneously) with the help of Repetier-Host. Can you anyone advice me? If not possible...
View ArticleHave to home after each manual adjustment
When I manually move the x/y motors (I usually don't mess with z), I have to rehome so that what I consider 0 (the corner of the bed) is 0. If I don't, then I think Repetier considers the end stops to...
View ArticlePrinter moves around top of print, then starts printing
When I load G-Code, I always see a ring (or box depending on what the shape of the object I am going to print is) around the piece I want to create, and when I dry ran the printer, The printer went up...
View Articleseems like we missed a ok, contiune sending ERROR gl paint code ERROR
seems like we missed a ok, contiune sending ERROR gl paint code ERRORKEEP GETTING THESE 2 ERRORS ON DIFFERENT PRINTS RUNNING 0.92 MOD REPETIER USING CURA AS SLICER ENGINE
View ArticleEcho: Heating failed
This is the first time I have hooked up my mini Kossel to my computer this is a brand-new build and meet your message I get is " Echo: Heating failed" is there anyone that can help me with this problem?
View ArticleRestore default eeprom settings option
Hi, I just installed Repetier host, server and firmware to try. I noticed you have a great feature to write and read the eeprom settings in the Host and the server. I have a simple suggestion: put a...
View Articlebed hight curve
HelloI want to test the command " tools / bed hight curve" on mu i3 printer, but I can't this commande is not active !can you explain me how to activate it ?I hope you understand me, I have translate...
View ArticleWhat has changed?
HiI have been using Rep version 1.5.6 for some time now and I upgraded to 1.6.0. After that everything I sliced in Slicer would over extrude. I checked all my settings. I even compared them to a laptop...
View ArticleRemove M107 command
Hello all, I have minor issue I'm hoping someone can help me with.Any time I use Cura in Rep Host a M107 (fan off) command is added to my Gcode, first thing after my start Gcode.I'm using this Gcode on...
View ArticleCommands waiting?
Hello, new user and new to forum. I have been trying to use repetier on my new printer rapide lite 200 which is using the rumba/taurino driver compatible with ATmega2560 on Com3. I was using repetier...
View Article3D printer commands waiting, won't do anything further?
First of all, let me say I'm in chemical engineering, so I'm not very familiar with the software/hardware engineering aspect of things.My 3D printer worked fine before I transported it to another...
View Articleextrusion
Hello,i am new here. i have worked with Repetier for 2 years now and get a strange response moving the flow sliderRepetier stops the flow of filament completely as soon as i select a value below 100%...
View ArticleZuto-bed leveling correction
Hey guys!Following the steps here,http://www.repetier.com/documentation/repetier-firmware/z-probing/Everything is working great! I have chosen the BED_LEVELING_METHOD 2, so I have a nice grid on my...
View ArticleHome issues
So, when I make a script like this:G28G0 Z0 Y90 X0 F3500and then I use it, my printer goes to home, but when it does the move command at the end the z axis still shows the height of home. As in when I...
View ArticleMonoprice 11614 software
Has anyone used Repetier-Host on a Monoprice 11614 dual extruder 3D printer? I just purchased one and would like to run Repetier instead of ReplicatorG as it suggests. I am a Technology teacher and...
View Article