Repetier-Host - Gcode for Zortrax Arm
Hi, I'm starting a whole new world (language) with GCODE. I've already used Gcode for my Prusa I3X printer.But now I want to control my Zortrax inspired robotic arm. They (Zortrax) gave a Gcode example...
View Articleerror: connection timeout
Error: Connection timeout - reset send buffer blockI keep getting this error. I set up my printer but haven't been able to make a print yet. I'm working with the Prusa I3 Hesine M505. My mainboard...
View ArticleHow to set home?
Hi all,I am using Repetier-Host V1.0.6. How do I set the coordinates of home? (The STL file I am printing needs to start a point other than 0,0,0). Thanks.
View ArticleShow Filament stopped working
Hi. This is my first post to the forum. So, any help would be appreciated. I am using Repetier Host V1.6.1 with a Printrbot Simple. I'm bootstrapping an X axis upgrade with the new (330mm) rods,...
View Articleproblems with directions
Hello Alli am using a arduino mega 2560 with a ramps1.4 driving DQ542ma"s, when i use the manual controls and move the y axis positive it moves, then i try move the y axis back and the z axis moves?I...
View Articleextruder output graph
the new release seems to have a non functional extruder temp graphoutput bed graph looks fine
View Articleconnecting repetier-host to Makerbot's replicator 2...
Hi everyone,I've got my replicator 2 bot and i wanted to go a deeper into different slicing techniques.so far repetier seems to provide the best preview per slice, and best feedback from the all...
View ArticleConnecting to Printrbot
Hello I have a PrintrBot Simple metal and have been using Repetier Host for over a year now, but every time I connect to a new computer for the first time, I run into a few problems every time. This...
View ArticleScaling isn't honored
When I design objects in Sketchup, I draw everything at x1000 and display units in meters. This gets around the issues of resolution limits in Sketchup.Export to an STL is done with export units set to...
View Articleyour printer has asked for a break
repetier host displayed after M321 and G28your printer has asked for a break
View ArticleNo longer able to view / change Firmware EEPROM Configuration on my Printrbot
I've been using Repetier-Host with my Printrbots for a long time. First an LCV1 (from the original Kickstarter) and now with my Metal Plus. In the past, I was able to view and edit EEPROM parameters...
View ArticleEmergency Stop Problems
Hi all!I recently tried to print an object on my Printrbot Plus, but when it attempted to home the Z axis something went wrong and the Z axis kept moving. In attempt to stop the motors from moving, I...
View ArticlePlease help with q3d settings!
Hi everyone, my name is Tom. The other day I was super excited when I saw q3d oneup 3d printer in a store near my house. As low budget as I am, this printer was like a gift from God!However, when I...
View ArticleInner and Outer walls
Im' trying to print a several times a Makerfare Robot.When i slice with Curaengine everything seems fine. But when i print the outer wall is getting thicker, it print the outer wall to the outside.This...
View ArticleRepetier pausing and Davinci screen saying it needs to load filament
I have a flashed Davinci AIO and recently I changed the hotend to an E3d v6. After many hours of Breaking and fixing, this is the problem I've come down to. When I run Repetier host and I click on the...
View ArticleExtruder temperature wont go above 200°
Hey Guys,I recently got myself a MakiBox A6 and had a lot of trouble... but at this point i dont know what else to do: My "default extruder temp." ist set to 235° (Im using ABS) and my "max extruder...
View ArticleClik here to view.
Inverted Z-axis when setting Home
So, I've just finished wiring my Prusa-i3 printer Melzi 2.0. Everything works fine except that whenever I try to home the printer it goes up instead of down. Technically, it thinks it's standing...
View ArticleCan Bed Height Map be used to modify GCode Z Axis height?
Hello, my name is Mariano,I was able to get Bed Height Map working perfectly, and getting map of heights of a PCB (copper surface over fiber) and i need this height differences to modify GCode.Is there...
View ArticleHosts not finding RAMBO board
Interesting problem here and I need a bit of help, I just installed a new RAMBO board (not cheap knock off) Windows 10 has installed it and the driver no problems; is working well on COM1. Can upload...
View ArticleRepetier won't print to second extruder.
I finally got to print with the right extruder last night (once). Every slice (with sli3r or cura) goes to the left extruder. #2 is selected in the Object Group menu, slic3r slices it and shows the #2...
View Article