Mac - Slicing
Is there a way to get another slicer besides slic3r or skeinforge for the mac Repetier Host? I have tried Cura externally then importing G-codes but they’re way off centre and a nightmare to sort out,...
View ArticleBUG: Curaengine mixing-extruder wipetower
When I slice with CuraEngine and use a 3-way mixing extruder, all the colors use the same position for wipetower, resulting in 3xthe extrusion at the same place. This means that the counter-pressure is...
View ArticleManual Control
We are setting up a K8200 with ftdichip.com driver on a iMac running Yosemite and the Mac Host. Two questions: 1. There is no tab for "Manual Control" that we can find. 2. Are we right in our...
View Articleread out height of extruder
Hi,Would there be a way to read out the height of the extruder?Situation: My delta is to big to work with a normal bowden extruder. The delays get to big. I ordered a flex3drive which is a kind of...
View ArticleBed height map - Wrong result data
I have a RepRap Delta printer with Repetier firmware 0.92.3, and I have metal heat bed with leveling in 3 points. Bed is correctly leveled mechanically.I have calibrated carriages on all three towers...
View ArticleError message M999
I am running an XP laptop and get the following error after the printer as printed a few layers. I am using Solidoodle 2 3D printer."Printer stopped due to errors. Fix error and use M999 to restart...
View ArticleBed temperature freezes when starting to print
Uploaded v2 marlin to my k8200 printerCould connect , move the x-,y-,z-motors.Can extrude, can warm up the bed (to 50°) and extruder (to 190°)No problem so far.When i want to print an object the bed...
View ArticleMultiple instances
Using a windows 8 computer-I have 2 printers running simultaneously. A Robo3d and a Solidoodle workbench. It had been working fine. But recently, one or the other, but not both at same time, one...
View ArticleCommands waiting?
Hello, new user and new to forum. I have been trying to use repetier on my new printer rapide lite 200 which is using the rumba/taurino driver compatible with ATmega2560 on Com3. I was using repetier...
View ArticleHow to light up a led, only when printing in demo mode.
I would like to light up a led when the extruder should work in demo-mode. So it becomes very easy in demo-mode to check when the extruder is activated in real-world. Would it be easy to assign a...
View Articlerepetier for makerbot replicator dual?
Hi i have used replicator for my printrbot simple and thinkbit is quite great. But now i bought a makerbot that only handle .x3g files.Is there any way to export that kind of file and does repetier...
View ArticleRepetier-Host heated bed 120C maximum.
Hello.How to set with Repetier-Host 1.0.6 more than 120C heated bed temperature?I make 4 changings in configuration.h:#define HEATED_BED_MAX_TEMP 130...#define UI_SET_MAX_HEATED_BED_TEMP...
View Articlehow to change model color
My model color changed from an orange (which it has always been) to a dark blue and I can't see detail. I need to chg it back.I have tried changing the model color under preferences but it does not -...
View ArticleRepetier cronology
SlvdesignHello Everybody! Does anybody know if Repetier has a kind of "memory" of the latest works?Yesterday I was printing an object, but suddenly the pc switched off and, obviously, so did the 3D...
View Articleno real connection
HelloMy printer runs on Arduino mega 2560 with ramps 1.4, marlin firmware.the speed settings are all the same, in the Firmware, Windows and in Repetier.But when I try to connect, all commands are...
View Articlez axis problem
Hi! I Printed first test object. Z-axis started to get stuck. When I removed z steppers from the printer, it strangely moving. It rotated to one direction then jump to the other rotate direction. or...
View ArticleRepetier is throttling down my extruder temperature
I have a problem where my set temperature is 210C. Repetier shows this on the Temperature Curve graph and says "TargetExtr0:210" in the Log. I can see in the Output Extruder graph, the software gives...
View ArticleCan I make changes to axis steps with Repetier host eeprom
Hello Im new to 3d printing. I have an Aworldnet A600 reprap prusa I3 I have the latest version of Repetier Host 1.06 I don't have any other software. NO arduino or Marlin or anything like that....
View ArticleNeed Help
Hello, everything seemed to have been working great until my extruder randomly began extruding really slowly. I may have changed a setting, but I have no clue which. I've tried figuring out how to make...
View Articleheight vs depth
I just installed a hotbed and was trying to configure it in printer settings.The hotbed is 200x200mm and the print bed is 335x305mm - z=295mmAt the top it shows X, Y, Z -- then has Width, Depth,...
View Article