Z Controls not working
Hi, I am currently using the Repetier Host V2.0.1 and I just set up everything almost perfectly. Minus the part that the Z control isn't working. Homing works fine though. The type of printer is a...
View ArticleCommands waiting
Okay so i bought a CoLiDo diy printer and it works perfectly with the models preloaded on the software it came with but wont work otherwise. (Im a complete newbie to all of this so sorry for my...
View ArticleHE K280 Calibration
I have a HE K280 printer and new to this. First off, I homed the printer successfully, but whenever I tell it to go down -10 mm, it goes down really slow and it doesn't stop. I have a feeling this has...
View ArticleExtruder only operates in manual mode after fresh install.
At first, I thought it was a Slicer problem, so I posted this under Slicer. However, since I am still a novice, I thought perhaps I should ask over here as well. Rather than spam the same post over...
View ArticleHow to make changes to the EEPROM data
Hi, Anycubic Linear-Plus Delta. For some crazy reason Anycubic have decided to change their firmware delivery format to .hex files.My Plus seems to be midway between some changes. The version prior to...
View ArticleG or M Code for Flowrate?
is there a G or M Code that will control/vary the flow rate setting in Repetier Host? It would be a welcome function as it would allow users to change flow rates for different layers.Thanks
View Articlerepetier firmware cant print from SD card
Hii used the Repetier-Firmware configuration tool 0.92.9 versionto update my previous setup in order to add a LCD screen support with SD cardthe problem is that the display works fine... i can...
View ArticleMissing several layers
Hello,My name is Troy. I am new to the 3d printing world. I just got a flsun diy prusa i3 and whenever I print, I am missing several layers at the start and I don't know how to fix it in Repetier. Can...
View Articleconnect to anet a8 (prusa i3?)
I can connect cura and print objects via the usb port but I would like to use Repetier to send info.I am using windows7 on a pc connected with a usb lead direct to the printer board . All I get on the...
View Article@execute commands executed before gcode completes
I've added an '@execute' command at the very end of the 'end gcode' section of the printer settings in Slic3r. However, the gcode in this section doesn't finish executing before the @execute command...
View ArticleNo longer able to view / change Firmware EEPROM Configuration on my Printrbot
I've been using Repetier-Host with my Printrbots for a long time. First an LCV1 (from the original Kickstarter) and now with my Metal Plus. In the past, I was able to view and edit EEPROM parameters...
View ArticleCR-10 Not Printing
Repetier indicates connected with printer. After slicing and pressing print, nothing happens - no heat, no fan, no action. Is there a setting I missed? Should the printer controller be off or on?
View ArticleY axis Offset error every z layering ?
HI.I am new to 3D printing, but have a friend helping me a lot.Everthing seems to work exept one mysterious thing...Every new Z layering the Y axis in munus direction is displaced buy 1 to 2 mm ?I use...
View ArticlePlease add a button / function
There is a possibility to create a button\option in Repeiter-Host pause on the necessary layer and shift the printhead to "0" (e.g. X-axis) to change plastic? This option is often necessary to print...
View ArticlePrusa MK2
Hello,I am new to this website as you can see.I downloaded the software but can not establish a connection to my printer.Thank you for the help.DBP
View ArticleRepetier won't print
I am new to the repetier program. I have my design ready to print and it sends it to the printer, but it never reaches my 3d printer. It gives me gcode, timing of print job, but never actually...
View ArticleClik here to view.
Where else aside from slicer can extruder temp be defined?
I have my extrude profile for cura set to 195 however looking at the gcode it's setting it to 205. I even changed the default extrude temp to 195 in config | printer setup | printer to eliminate that...
View ArticleDecoupling Error
I have a K280 printer and I printed out two prints when I ran into a decoupling error. I checked to see if there were any volts going through the place where the wire connected to the board (there were...
View ArticleCamera crops anything above 300x180 on pi w/ mjpg-streamer
The server view always looks fine but in the host it crops it. The odd thing is it doesn't crop it centered, it appears to be cropping the top left of the actual camera image. Is this a bug of some...
View Articleconnecting repetier-host to Makerbot's replicator 2...
Hi everyone,I've got my replicator 2 bot and i wanted to go a deeper into different slicing techniques.so far repetier seems to provide the best preview per slice, and best feedback from the all...
View Article